The Foundation of Every Great Cabinet
The wood you choose for your arcade cabinet affects everything: weight, durability, how it takes paint or vinyl, how easy it is to work with, and ultimately, how long it lasts. There's no single "best" choice — only the best choice for your specific build, budget, and skill level.
I've built cabinets with all three major options: MDF, plywood, and cabinet-grade maple. Here's the honest comparison.
MDF (Medium-Density Fiberboard)
What it is: Engineered wood made from wood fibers bonded with resin under heat and pressure. It's dense, smooth, and uniform.
Cost: $30–$50 per 4x8 sheet (3/4")
| Pros | Cons |
|---|---|
| Extremely smooth surface — perfect for paint | Very heavy (a 4x8 sheet weighs ~97 lbs) |
| No grain pattern — takes paint evenly | Swells and deteriorates when exposed to moisture |
| Easy to cut with basic tools | Edges are fragile and can chip |
| Cheapest option | Produces fine dust when cutting (wear a mask) |
| Available everywhere | Not structurally strong for thin pieces |
Best for: Budget builds, first-time builders, cabinets that will be painted, indoor-only use.
My take: MDF is the workhorse of the arcade building community for good reason. It's cheap, it's forgiving, and it produces a beautiful painted finish. If this is your first build, start here. Just don't try to move the finished cabinet by yourself — it will be heavy.
Plywood (Birch or Baltic Birch)
What it is: Layers of real wood veneer glued together with alternating grain directions. Baltic birch is the premium option with more, thinner layers.
Cost: $50–$90 per 4x8 sheet (3/4" birch); $70–$120 for Baltic birch
| Pros | Cons |
|---|---|
| Strong and lightweight compared to MDF | Surface grain visible (needs prep for smooth paint) |
| Handles moisture much better than MDF | Quality varies significantly between brands |
| Beautiful edge grain (can be a design feature) | More expensive than MDF |
| Structurally sound — holds screws well | Can splinter when cutting |
| Good balance of workability and durability | Requires sharper tools for clean cuts |
Best for: Mid-range builds, builders with some experience, cabinets that might be moved, builds where weight matters.
My take: Birch plywood is my go-to recommendation for most builders. It's the sweet spot between cost, workability, and durability. The edge grain looks great with a clear finish, and it's light enough that you won't need three people to move the finished cabinet.
Cabinet-Grade Maple
What it is: Solid hardwood from maple trees. Dense, hard, and beautiful. This is what fine furniture is made from.
Cost: $8–$14 per board foot (roughly $150–$300+ for a full cabinet depending on design)
| Pros | Cons |
|---|---|
| Stunning natural beauty | Expensive |
| Extremely durable — will last decades | Hard to work with — requires quality tools |
| Takes stain and clear coat beautifully | Heavy (though less than MDF) |
| Premium feel and appearance | Unforgiving of mistakes — no hiding errors |
| Excellent screw and joint holding | Requires more advanced woodworking skills |
Best for: Premium/showpiece builds, experienced woodworkers, cabinets meant to be furniture-quality, builds with natural wood finish.
My take: Maple is what I use for my premium G&G Arcade builds. There's nothing like the look and feel of a real hardwood arcade cabinet. But I won't sugarcoat it — working with maple requires better tools, more skill, and more patience. If you're not comfortable with hardwood joinery, this isn't where you should start.
The Decision Matrix
| Factor | MDF | Plywood | Maple |
|---|---|---|---|
| Cost | Lowest | Mid | Highest |
| Weight | Heaviest | Lightest | Mid-Heavy |
| Durability | Low-Mid | Mid-High | Highest |
| Workability | Easiest | Moderate | Hardest |
| Paint Finish | Excellent | Good (with prep) | Good |
| Natural Finish | Poor | Good | Excellent |
| Moisture Resistance | Poor | Good | Good |
| Skill Level Needed | Beginner | Intermediate | Advanced |
My Recommendation
First build? Use MDF. Learn the process, make your mistakes on cheap material, and focus on the experience rather than the materials.
Second or third build? Move to birch plywood. You'll appreciate the weight savings and improved durability.
Building a showpiece? Maple or premium hardwood. But only if you have the tools and skills to do it justice.
Whatever you choose, the most important thing is that you're building. The best arcade cabinet is the one that gets finished.